Hello, welcome to: Zhuhai Extreme Aerial Working Equipment Co..ltd

How to maintain and repair aluminum scaffold?


Release Time:

2021-09-15

How to maintain and repair aluminum scaffold? 1. Clean the ladder regularly to prevent some chemicals from corroding the surface of the ladder. Check the connection regularly and inject lubricating oil if necessary. 2. If the ladder material is bent or broken or the joint does not work properly, contact the manufacturer for professional maintenance. 3. If the environment is poor, the service life of the ladder can be reduced. Generally speaking, its service life is 2 years indoors and 1 year outdoors.

How to maintain and repair aluminum scaffold?

1. Clean the ladder regularly to prevent some chemicals from corroding the surface of the ladder. Check the connection regularly and inject lubricating oil if necessary.

2. If the ladder material is bent or broken or the joint does not work properly, contact the manufacturer for professional maintenance.

3. If the environment is poor, the service life of the ladder can be reduced. Generally speaking, its service life is 2 years indoors and 1 year outdoors.

Before use:

1. Ensure that all rivets, bolts, nuts and moving parts are securely connected, stairs and staircases are securely connected, and stretch card springs and hinges are in good condition.

2. Keep it clean, oil, oil, wet paint, mud, snow and other slippery substances.

3. Operator's shoes should be kept clean and leather soles should not be worn.

4. Install safety belts if you are more than 1.5 meters above the ground.

To use:

1. Do not use ladders when you are tired, taking drugs, drinking alcohol or having physical impairment.

2. It should be placed on a firm and soft floor, not on ice, snow and slippery floor without anti-slip and fixing devices.

3. During the work, do not exceed the maximum load support quality displayed.

4. Do not use stairs in strong winds.

5. Metal ladders conduct electricity. Do not approach the site.

6. When climbing, people face the ladder with their hands clasped and their center of gravity remaining in the center of the two stair posts.

7. Working process do not stand on the ladder within 1 meter of the top of the stairs, always maintain a safe height of 1 meter, do not climb the top of the highest support point.

8. Don't put your hands over your head while doing homework. To keep the body from losing balance and causing danger.

9. It is forbidden to cross the scaffold directly from one side to the other

How to choose the height of aluminum scaffold correctly?

The main purpose of aluminum scaffold is to work at high altitude, but how to choose the right height because of the length of the problem of the determination of many construction personnel. Improper selection can make the scaffolding too high during installation or not high enough.

First, choose the length of the layer. Aluminum foot plate is an assembly product, rather than the same as other products, the construction required for assembly, the length of work is high, so it must be flexible and appropriate to choose aluminum foot plate components, complete aluminum foot plate assembly. At present, the length of each layer of Glitter aluminum foot board is 2.32 meters, 4 sections: 1.85M, 3 sections: 1.39M, 2 sections of guardrail: 0.85M; The upper length can be assembled in a single length or mixed with different lengths. All the accessories are standard, very ordinary. Choose the right floor. The length required for construction is the total height of the entire aluminum springboard after the height of each floor is increased. Then there is the problem. A second problem may arise in adjusting the necessary height.

Two. How are the three heights of platform length, shelf full height and working height determined?

The height of 1-1.2m is used as the guardrail of the scaffold. Therefore, when choosing the length of the aluminum scaffold, please explain whether the required height is the height of the platform or the overall height of the frame. The relationship among the three is: height = the height of the platform 2m(the height of people standing on the platform with their hands raised), the total height of aluminum alloy scaffolding = the height of the platform and the height of the guardrail. By defining the length of each layer of aluminum alloy scaffolding, understanding the relationship between the height of the platform, the height of the guardrail, the total height of the frame and the length, you can accurately choose the length of aluminum alloy scaffolding.

 

News Bulletin

Wechat Official Account:

图片名称

Zhuhai Extreme Aerial Working Equipment Co..ltd

Tel: 0756-3316847/4006-087-086
Phone: 13697777117
Fax: 0756-3610038
Email address: jilimc@163.com
Address: Building 2, Jishan Industrial Zone, Tangjiawan Town, Xiangzhou District, Zhuhai City


copyright © 2022 Zhuhai Extreme Aerial Working Equipment Co..ltd