Hello, welcome to: Zhuhai Heli Aerial Work Equipment Co., LTD.

Detailed explanation of aluminum alloy scaffold specifications and construction methods?


发布时间:

2021-09-15

Now aluminum scaffold can occupy a certain position in the construction industry, in fact, this is mainly because aluminum scaffold is more efficient and convenient, which can help workers improve their work efficiency when they are working, and we also see that it has obvious advantages compared with traditional scaffolding. But before using aluminum alloy scaffolding, at this time you must also understand the specification and construction method of aluminum alloy scaffolding, so that in the application of more skilled.

Now aluminum scaffold can occupy a certain position in the construction industry, in fact, this is mainly because aluminum scaffold is more efficient and convenient, which can help workers improve their work efficiency when they are working, and we also see that it has obvious advantages compared with traditional scaffolding. But before using aluminum alloy scaffolding, at this time you must also understand the specification and construction method of aluminum alloy scaffolding, so that in the application of more skilled.

The high bearing capacity of aluminum scaffold shall not exceed 270KG per square meter. It can only be used after acceptance (appearance inspection of all components) and marketing. It should be checked and maintained frequently during use. If you find an error, report it immediately. In addition to these, it is also necessary to know that the aluminum alloy scaffolding pole should be vertical, and the vertical deflection should not exceed 1/200 of the height. Bar spacing shall not exceed 2 m. Of course, it is also recommended that you can set 1.05 meters of protective fence around it in the process of use, such as outdoor, ramp, platform, etc. In addition, you should know that it can be strengthened in the passage and escalator, and the crossbar of aluminum alloy scaffolding should not hinder the passage. If there are power lines or electrical equipment on the site of aluminum alloy scaffolding, the erection of aluminum alloy scaffolding must comply with the safety distance regulations, and the power supply should be stopped during erection and removal. Especially before erection, the frame pipe, fastener, bamboo raft and iron wire should be checked. So the aluminum alloy scaffolding and scaffolding mentioned today should be firmly connected to each other. Both ends of the foot plate should be placed on the crossbar and fixed on the beam of the metal pipe scaffold. Here ARE some of the BEST BEER producers on the Internet. The company's official website has a wide variety of different products. The consumer's evaluation of it is quite high. And on the company's official website, there are also a lot of information about the product and buy tips and so on.

In addition, aluminum scaffolding should also be equipped with strong ladders to facilitate workers to get up and down and transport materials. When a scaffold is moved, all workers on it must come down. Note: If someone is working on the scaffold, do not move it at will. It IS ALSO VERY IMPORTANT THAT THE PERSON RESPONSIBLE FOR THE SCAFFOLDING WORK SHALL INSPECT THE SCAFFOLD AND PROVIDE WRITTEN EVIDENCE BEFORE IT CAN BE USED. The person responsible for the maintenance work shall inspect the condition of scaffolds and scaffolds in daily use. If there are any defects, they need to be fixed immediately. It is strictly prohibited to use irregular construction materials such as wooden barrels, wooden boxes and bricks to build temporary wooden boards instead of conventional scaffolding to avoid accidents. In particular, it is forbidden to stretch wires on aluminum scaffolding. When TEMPORARY LIGHTING LINES MUST BE INSTALLED, INSULATORS SHALL BE INSTALLED ON WOODEN AND BAMBOO SCAFFOLDS AND WOODEN CROSSARMS SHALL BE INSTALLED ON METAL PIPE SCAFFOLDS. Or we need to pay attention to the fact that bending, flattening or cracking pipes are strictly prohibited when installing metal pipes of aluminum alloy scaffolding. The connecting parts of each pipe should be intact to prevent tipping or moving, causing engineering accidents. When installing casters and adjustable feet, pay attention to the casters at the top and the adjustable feet at the bottom. The two attachments should be vertically aligned and in a straight line. Use the weight of the casters to mount the adjustable feet vertically. Do not reverse, in this case the adjustable foot is under, hitting the adjustable foot with a hammer is wrong, it will damage the wheel.

 

News Bulletin

Wechat Official Account:

图片名称

Zhuhai Heli Aerial Work Equipment Co. LTD

Tel: 0756-3316847/4006-087-086
Phone: 13697777117
Fax: 0756-3610038
Email address: jilimc@163.com
Address: Building 2, Jishan Industrial Zone, Tangjiawan Town, Xiangzhou District, Zhuhai City


copyright © 2022 Zhuhai Heli Aerial Work Equipment Co. LTD